saroj60

ผู้ช่วยศาสตราจารย์ ดร.สาโรช  พูลเทพ 
Asst. Prof. Dr. Saroj  Pullteap

ตารางสอนอาจารย์

Education 
- Ph.D. (Optoelectronic Engineering), Institut National Polytechnique de Toulouse (INPT), Toulouse, France, (2008)
- วศ.ม. (มาตรวิทยาทางอุตสาหกรรม), มหาวิทยาลัยเทคโนโลยีพระจอมเกล้าธนบุรี, ประเทศไทย (พ.ศ. 2545)
- คอ.บ. (เทคโนโลยีคอมพิวเตอร์), สถาบันเทคโนโลยีพระจอมเกล้าพระนครเหนือ, ประเทศไทย (พ.ศ. 2540) 

Contact Information
Phone : 0 3425 9025
E-mail : This email address is being protected from spambots. You need JavaScript enabled to view it.

Research Area
ระบบตรวจจับชนิดใยแก้วนำแสง และวิศวกรรมเมคคาทรอนิกส์ (Fiber Optic Sensor, Mechatronic Engineering)

ผลงานวิจัย
1) “Development of a Fiber-based Interferometer Sensor for Absolute Distance Measurements”, Supported by France Government under the Junior Research Fellowship Program 2011.
2) 
“Development of an Extrinsic Fiber Fabry-Perot Interferometer for Small Displacement Measurement”, Supported by National Science and Technology Development Agency 2011.
3) 
“Improvement of Energy Efficiency in LED Lighting using a Modified AC-DC Fly-back Converter Technique”, Supported by Research and Researchers for Industries-RRI program 2017.
4) 
“Improvement of LED Driver Circuit to Reduce Production Cost in Thai Industry”, Supported by Talent Mobility program 2017.

ผลงานวิจัยที่ได้รับการตีพิมพ์เผยแพร่
วารสารวิชาการ ระดับนานาชาติ
1) S. Pullteap, H.C. Seat and T. Bosch, “Modified fringe-counting technique applied to a dual-cavity fiber Fabry-Pérot vibrometer”, Opt. Eng., vol. 46, no. 11, pp. 115603/1 - 115603/8, 2007.
2) S. Pullteap and H.C. Seat, “Dynamic displacement measurements with a dual-cavity fiber Fabry - Pérot interferometer”, Proc. SPIE, vol. 6793, pp. 67930A - 67930A-8, 2008.
3) N. Sathitanon and S. PULLTEAP, “A fiber optic interferometer sensor for dynamic measurement”,  International Journal of Computer Science and Engineering, vol. 2 pp. 63 - 66, 2008.
4) S. Pullteap, “Development of a Fiber Based Interferometric Sensor for Non-Contact Displacement Measurement”, World Academy of Science, Engineering and Technology Journal, vol. 66, pp. 1164 - 1168, 2010. 
5) Worawut Khunsin, Andreas Amann, Gudrun Kocher-Oberlehner, Sergei G.Romanov, Saroj Pullteap, Han Cheng Seat, Eoin P. O’Reilly, Rudolf Zentel, and Clivia M. Sotomayor Torres, “Noise-Assisted Crystallization of
Opal Films”, Adv. Funct. Mater., vol. 22, pp. 1812 - 1821, 2012.
6) S. Pullteap and P. Jaruyanon, “Study  of Electric Vehicle Demand in Bangkok and its Vicinities: A Case of Motorcycle Taxis”,  International Journal of Emerging Technology and Advanced Engineering, vol. 2, pp. 23 -
28, 2012.
7) Saroj Pullteap and Teerapat Boontuboon, “Development of a Controlling Program for Six-legged Robot by VHDL Programming”,  International Journal of Computer, Internet and Management, vol. 20, no. 3, pp. 23 -
27, 2012.
8) S. Pullteap, “Development of a Hexapod Robot Controlling by Fuzzy Logic Controller”,  International Journal of Artificial Intelligence and Mechatronics, vol. 1, no. 6, pp. 141 - 146, 2013.
9) S. Pullteap and M. Pathomsuriyaporn, “Study on Disaster Prevention Plan for an Electronic Industry in Thailand”,  International Journal of Mechanical Science and Engineering, vol. 7, no. 11, pp. 190 - 193, 2013.
10) S. Pullteap and H. Seat, “An Extrinsic  Fiber Fabry-Perot Interferometer for Dynamic Displacement Measurement”, Photonic Sensors, vol. 5, no. 1, pp. 50 - 59, 2015.
11) S. Pullteap, “Development of an Optical Fiber Based Interferometer for Strain Measurements in Non-Destructive Application”, Electrical Engineering, vol. 99, no. 1, pp. 379 - 386, 2017.

วารสารวิชาการ ระดับชาติ
1) Saroj Pullteap, “Characterization of Fringe Visibility on Fiber based Fabry- Pérot Interferometer”, The Journal of Applied Science  (King Mongkut’s University of Technology North Bangkok), vol. 8, no. 2, pp. 69 - 77, 2009.
2) Saroj Pullteap, “Resolution Improvement of Fiber Based Fabry-Pérot Interferometer by Using Zero-Crossing Fringe Counting Technique”, The Journal
of King Mongkut’s University of Technology North Bangkok, vol. 20, no. 3, pp. 639 - 647, 2010.
3) S. PULLTEAP, “FPGA an Intelligent Digital Integrated Circuit: Evolution, Development and Applications”,  Journal of Applied Computer Technology and Information Systems, vol. 1, no. 1, pp. 31 - 35, 2011.
4) Saroj Pullteap and Chantana Sangvornyotin, “Technical Textile Industry for Engineering Applications in Thailand: Roles and Significance”,  Journal of Science and Technology Mahasarakham University, vol. 31, no. 5, pp. 689 – 694, 2012.
5) S. Pullteap, “Design and Development of an Automatic Swine Feeding Machine Cooperated with Radio Frequency Identification Technique”, Journal of Science and Technology Mahasarakham University, vol. 32, no. 1, pp. 106 – 111, 2012.
6) S.Pullteap, “Fiber Optic based Fabry-Perot Interferometric Sensor Applied for Mechatronic Engineering”, The Journal of Industrial Technology, vol. 12, no. 2, pp. 62 – 76, 2016.

การประชุมวิชาการ ระดับนานาชาติ
1) H.C. Seat, S. Pullteap and T. Bosch, “An extrinsic fibre optic interferometer with possible signal fading compensation  for vibrometric applications”,  22nd IEEE Instrumentation and Measurement Technology Conference, Ottawa (Canada), pp. 2236 - 2241, May 2005.
2) S. Pullteap, H.C. Seat et T. Bosch, “Interféromètre à fibre optique pour la mesure de déplacement”, 6th Meures et Techniques Optiques pour l’Industrie, Marseille (France), pp. 25 - 26, Novembre 2005.
3) S. Pullteap, H.C. Seat et T. Bosch, “Reflectance characterisation of a fibre optic interferometer for displacement determination in vibration analysis”, 5th ODIMAP V, Madrid (Spain), pp. 27 - 32, October 2006.
4) Saroj PULLTEAP, “Conception d’un interférométre de Fabry-Pérot extrinséque à fibre optique pour l’analyse vibratoire”, Journée de l'Ecole Doctorale GEET-ENSAT – INP, Toulouse (France), pp. 180 - 182, Mars 2007.
5) S. Pullteap, H.C. Seat and T. Bosch, “Temperature and distance-dependent errors in a dual-cavity fibre Fabry-Pérot interferometer for vibration analysis”,  24nd IEEE Instrumentation and Measurement Technology Conference, Warsaw (Poland), pp. 1 - 6, May 2007.
6) Han Cheng Seat and Saroj Pullteap  “An extrinsic Fiber Fabry-Pérot interferometer for Dynamic Displacement Measurement”,  IEEE International Conference on Mechatronics and Automation, Harbin (China), pp. 3027 - 3032, August 2007.
7) S. Pullteap, H. C. Seat, M. Cattoën, P. Bernard, J. C. Lépine, F. Boudin, J. Chery, “A phase-tracking fiber interferometer for seismologic applications”,  IEEE Sensors 2008 (7th IEEE Conference on Sensors), Lecce (Italy), pp. 938 - 941, October 2008.
8) S. Pullteap, M. Cattoën, H. C. Seat, T. Bosch, F. Boudin, J. Chéry, P. Bernard, J. C. Lépine, “Développement d’un interféromètre fibré pour des applications en sismologie et en inclinométrie”,  9ème Colloque sur les Contrôles et Mesures Optiques pour l’Industrie, Nantes (France), Novembre 2008.
9) S. Pullteap, “Development of a Fiber Based Interferometric Sensor for Non-Contact Displacement Measurement”,  International Conference on Computer, Electrical, and Systems Science, Paris (France), pp. 1475 - 1479, June 2010.
10) S. Pullteap and P. Wasu, “Development of Locker System Controlling by MCS-51 Microcontroller Correlated with Radio Frequency Identification Technique”, 2nd International Conference on Science  Technology and Innovation for Sustainable Well-Being, Quang Binh (Viet Nam), pp. 59 - 64, August 2010.
11) Saroj Pullteap and Chantana Sangvornyotin, “Technical Textile Industry for Engineering Applications in Thailand: Roles and Significance”, 3rd International Conference on Science Technology and Innovation for Sustainable Well-Being, Danang (Viet Nam), pp. 220 - 224, August 2011. 
12) S. Pullteap and H. C. Seat “Investigation and Compensation of Polarization-Induced Signal Fading in an Extrinsic Fiber-based Fabry-Pérot Interferometric Vibrometer”,  IEEE International Conference  on Mechatronics and Embedded System and Applications, Suzhou (China), pp. 12 - 17, July 2012.
13) S. Pullteap and S. Kritsamrankul, “Design and Development of an Automatic Swine Feeding Machine Cooperated with Radio Frequency Identification Technique”, 4th International Conference on Science Technology and Innovation for Sustainable Well-Being, Pattaya (Thailand), pp. 92 - 97, August 2012.
14) S. Pullteap, “Development of an Optical  Fiber based Interferometer for Small Vibration Measurements”,  The 11th International Conference on Optical Communications and Networks (ICOCN2012), pp. 107 - 110, November 2012.
15) S. Pullteap and M. Pathomsuriyaporn, “Study on Disaster Prevention Plan for an Electronic Industry in Thailand”,  International Conference on Economic and Business Management: ICEBM 2013, pp. 180 - 183, November 2013.
16) Saroj Pullteap and Chantima Lapsongphon, “Study on Life-Cycle Assessment of Lighting Lamps: Approach  in Greenhouse Gas Effects”,  Joint Symposium on Mechanical-Industrial Engineering and Robotic 2013 (MIER2013), pp. 13, November 2013.
17) Ch. Luangbumrungrak, S. Cheevasatheinchaiyaporn, and S. Pullteap, “Feasibility Analysis for a Smart Building System at Silpakorn University”, 6th International Conference on Science Technology and Innovation for Sustainable Well-Being, Siem Reap, (Kingdom of Cambodia), August 2014. 
18) Ch. Lapsongphon and S. Pullteap, “A Comparison of Production Effects between Compact Fluorescent and LED Lighting: A Case for CO2 Emission”, 6th International Conference on Science, Technology and Innovation for Sustainable Well-Being, Siem Reap, (Kingdom of Cambodia), August 2014.
19) T. Tangtanawat, S. Udomsombatrattana, S. Pullteap and K. Kheovichai, “Worthiness of Changing LED Lighting System at Silpakorn University”, International Symposium on Multimedia and Communication Technology (ISMAC), Phranakhon Si Ayutthata, (Thailand), pp. 97 - 101, September 2015.
20) V. Chotigavanich, S. Poolthaveetham, S. Pullteap and K. Kheovichai, “The possibility study on waste management at Silpakorn University (Sanam Chandra Palace Campus)”,  International Symposium on Multimedia and Communication Technology  (ISMAC), Phranakhon Si Ayutthata, (Thailand), pp. 88 - 92, September 2015.
21) P. Chatpoomrujee, R. Khemwat and S. Pullteap, “Process Improvement in Blow Film Plastic Production by Using Engineering Business Principle”, International Symposium on Multimedia and Communication Technology  (ISMAC), Phranakhon Si Ayutthata, (Thailand), pp. 93 – 96, September 2015.
22) S. Pullteap, “Development of a Walking Robot by using  FPGA Controller”, Mechatronics - REM, Compiegne, (France) pp. 54 – 57, June 2016.
23) Chantima Lapsongphon and Saroj Pullteap, “Improvement of a Power Factor Correction in AC Source by Using Boost Converter Circuit”, 9th International Conference on Science, Technology and Innovation for Sustainable Well-Being, Khunming, (China), June 2017. 
24) Ch. Lapsongphon, S. Pullteap and P. Thaisongkroh, Feasibility Analysis of Investment Cost for LED Driver Production in Thailand Industry”, International Symposium on Multimedia and Communication Technology (ISMAC), Phranakhon Si Ayutthata, (Thailand), pp. 201 - 204, August 2017.
25) K. Pothong, W. Wongsathornwa and S. Pullteap, “A Study of Opinion Summarization in Underground System Project at Silpakorn University”, International Symposium on Multimedia and Communication Technology (ISMAC), Phranakhon Si Ayutthata, (Thailand), pp. 205 - 208, August 2017.
26) N. Jirachottanakul, S. Pullteap and K. Kheovichai, “Feasibility Analysis of Waste Management at Silpakorn University”, International Symposium on Multimedia and Communication Technology (ISMAC), Phranakhon Si Ayutthata, (Thailand), pp. 209 - 212, August 2017.
27) O. Intharasombat and S. Pullteap, “Image Processing Technique for Quality Control in Industrial Production”, International Symposium on Multimedia and Communication Technology (ISMAC), Phranakhon Si Ayutthata, (Thailand), pp. 213 - 216, August 2017.

การประชุมวิชาการ ระดับชาติ
1) S. Pullteap and W. Thawladda, “Light Spectrum Measurement by Photodiode Array”, 24th Electrical Engineering Conference, Bangkok (Thailand), pp. 671 - 675, November 2001. 
2) S. Pullteap and N. Sathitanon, “Detection System by CCD Camera”, 42nd Kasetsart University Annual Conference, Bangkok (Thailand), pp. 295 - 302, February 2004.
3) N. Satitanon and S. Pullteap, “Applied an optical fiber sensor for displacement measurement in a vibrating target”,  29th Electrical Engineering Conference, Pattaya (Thailand), pp. 1133 - 1136, November 2006.
4) S. Pullteap, “Small displacement measurements with a fiber Farby-Pérot interferometer”, 32th Electrical Engineering Conference, Prachinburi (Thailand), pp. 1147 - 1150, October 2009.
5) P. Wasu and S. Pullteap, “Automatic rental locker system using radio frequency identification”, 6th Kasetsart University (Kamphaeng Saen Campus) Annual Conference, Nakornpathom (Thailand), pp. 1768 - 1775, December 2009.
6) S. Pullteap  et al., “FPGA: Evolution, Development and Applications”,  2nd National Conference on Applied Computer Technology and Information Systems, Bangkok (Thailand), pp. S4/25 - 31, February 2011.
7) S. Kritsumran, S. Pechsong and S. Pullteap, “Development of a Temperature Controlling System in Solar Drying Chamber by using a Microcontroller”,  4th National Conference on Applied Computer Technology and Information Systems, Bangkok (Thailand), pp. 109 - 114, April 2012.

ผลงานวิจัยฉบับเต็ม (ถ้ามี)
-
ผลงานวิจัยในฐานะอาจารย์ที่ปรึกษาวิทยานิพนธ์ (ถ้ามี)
-

ตำรา หนังสือ 
- สาโรช พูลเทพ (2558), “การเขียนโปรแกรมคอมพิวเตอร์สำหรับวิศวกรรมเครื่องกล (Computer Programming for Mechanical Engineering)”, พิมพ์ครั้งที่ 1, -นครปฐม, คณะวิศวกรรมศาสตร์และเทคโนโลยีอุตสาหกรรม มหาวิทยาลัยศิลปากร วิทยาเขตพระราชวังสนามจันทร์

บทความทางวิชาการ (ถ้ามี)
-
อื่นๆ (ถ้ามี)
-

Share...

library

facebookmechanicalsilpakorn

youtubeME

Staff

Dechaphan2

Course

bengme

btecheb

mengenergy

phdenergy

Alumni

f alumni

Job Search

JobME Bigsize

Silpakorn University

eng c

su c

ทุนการศึกษา

scholar

STISWB 2016

sakaeo

Download

ตำราเรียน

แบบฟอร์มที่เกี่ยวข้อง

ปริญญานิพนธ์

แผนผังหลักสูตร

สำหรับอาจารย์

Admissions

ข้อมูลการรับสมัครนักศึกษา : โครงการปกติ และ โครงการเพิ่มพิเศษ

Admissions 
กรอกใบสมัคร 

1)โครงการเทคโนโลยีอุตสาหกรรมสัญจร ประเภท ก.  
2)โครงการเทคโนโลยีอุตสาหกรรมสัญจร ประเภท ข. 
3)โครงการส่งเสริมเด็กดีมีคุณธรรมและบำเพ็ญประโยชน์เพื่อสังคม
4)โครงการรับนักศึกษาจากโรงเรียนผู้มีความสามารถ พิเศษทางด้านวิทยาศาสตร์ และคณิตศาสตร์  
5)โควตาพิเศษ มหาวิทยาลัยศิลปากร (28 จังหวัด)
6)โครงการรับนักศึกษาเพิ่มพิเศษฯ สาขาวิชาวิศวกรรมเครื่องกล
7)โครงการรับนักศึกษาเพิ่มพิเศษฯ สาขาวิชาธุรกิจวิศวกรรม


Login

We have 18 guests and no members online

promise