BES logo

Academic Staffs

thosaponkvichuda

Research Areas

1. Energy Conservation and Green Building Labelling

2. Dehumidification

3. Thermal and visual comfort

4. Daylighting

5. Renewable energy

6. Engineering Business

Laboratory Facilities

- Liquid desiccant dehumidification system

- Solid desiccant dehumidification system

- Movable dehumidification system

BES1
............................................................................................................................

BES2
............................................................................................................................
              BES3

............................................................................................................................

Publications

Desiccant dehumidification system

The packed bed type of liquid desiccant dehumidification system 

Average performance of the system

  - 0.15 g/s moisture removal rate

  - 0.2% dehumidification effectiveness

40% concentration of calcium chloride solution was used as desiccant.

BES4

............................................................................................................................

BES5

............................................................................................................................

BES6

............................................................................................................................

BES7

 ............................................................................................................................

BES8

............................................................................................................................

BES9

............................................................................................................................

Energy Conservation and Green Building Labelling

(National Jornals)

1. Katejanekarn, T. and Pinpiti, W. (2014), “Optimum Green Building Label for Buildings in Thailand”, The Sixth International Conference on Science, Technology and Innovation for Sustainable Well-Being (STISWB VI), Apsara Angkor Hotel, Siem Reap, Kingdom of Cambodia, August 28-30, 2014, Paper No. ENE02-ID029, pp. 84 (8 p.). (Accepted to be published in RMUTI Journal Special Issue 1 2015, pp. 8-14)

(Inter. Conferences) 

1. Mettanant, V. and Katejanekarn, T. (2014), “Optimum Thailand’s Green Building Label for an Office Building in Thailand”, International Conference and Utility Exhibition on Green Energy for Sustainable Development (ICUE 2014), Jomtien Palm Beach Hotel and Resort, Pattaya, Chonburi, Thailand, March 19-21, 2014, Paper No. 182_E, pp. 57 (7 p.).

2. Katejanekarn, T. and Prasartkaew, B. (2013), “Impacts of Window Frames on Building Energy Consumption”, The Fifth International Conference on Science, Technology and Innovation for Sustainable Well-Being (STISWB V), The Grand Luang Prabang Hotel & Resort, Luang Prabang, Lao PDR, September 4-6, 2013, Paper No. MME01, pp. 21 (6 p.). (Best paper award in the field of mechanical and manufacturing engineering)

3. Jaruyanont, P. and Katejanekarn, T. (2010), “Energy Efficiency Promotion for Rural Villages in Myanmar”, The Second International Conference on Science, Technology and Innovation for Sustainable Well-Being (STISWB II), Quang Binh University, Quang Binh, Vietnam, August 13-14, 2010, EN-02, pp. 75-81.

(National Conference) 

1. Hirunyakran, N., Tangwichai, L., Prakongjai, J., Kittiwannachot, N., and Katejanekarn, T. (2013), “Feasibility Study of Constructing an Office Building to Conform to Thai Green Building Standard”, The 27th Conference on Mechanical Engineering Network of Thailand (ME-NETT #27), Dusit Thani Pattaya Hotel, Pattaya, Chonburi, Thailand, October 16-18, 2013, ETM-2019, pp. 189-190 (12 p.).

2. Dullayasopapan, C., Horpetch, T., Tawanapong, T., and Katejanekarn, T. (2013), “Effects of Window Frames on Thermal Properties of Window Systems and Building Energy Consumption”, The 27th Conference on Mechanical Engineering Network of Thailand (ME-NETT #27), Dusit Thani Pattaya Hotel, Pattaya, Chonburi, Thailand, October 16-18, 2013, ETM-2020, pp. 191-192 (9 p.).

3. Katejanekarn, T., Jaruyanon, P., Mettanant, V., Chomchuen, P., and Kesornthong, P. (2007), “The Study of Energy Saving in a School Building by Using a Computer Simulation Program”, The 21st Conference on Mechanical Engineering Network of Thailand (ME-NETT #21), Welcome Jomtien Beach Hotel Pattaya, Chonburi, Thailand, October 17-19, 2007, CST-13, p. 60.

 

Dehumidification

(Inter. jornals) 

1. Katejanekarn, T., Chirarattananon, S., and Kumar, S. (2009), “An experimental study of a solar-regenerated liquid desiccant ventilation pre-conditioning system”Solar Energy, Vol. 83, No. 6, pp. 920-933.

2. Katejanekarn, T. and Kumar, S. (2008), “Performance of a solar-regenerated liquid desiccant ventilation pre-conditioning system”Energy and Buildings, Vol. 40, No. 7, pp. 1252-1267.

3. Brandemuehl, M. J. and Katejanekarn, T. (2004), “Dehumidification Characteristics of Commercial Building Applications”ASHRAE Transactions, Vol. 110, Part 2, pp. 65-76.

 

(National Jornals)

1. Katejanekarn, T. and Prasartkaew, B. (2014), “Performance Test of a Silica Gel Dehumidifier”, The Sixth International Conference on Science, Technology and Innovation for Sustainable Well-Being (STISWB VI), Apsara Angkor Hotel, Siem Reap, Kingdom of Cambodia, August 28-30, 2014, Paper No. ENE20-ID028, pp. 96 (7 p.). (Best paper award in the field of energy engineering) (Accepted to be published in RMUTI Journal Science and Technology, Vol. 8, No. 1 (Jan-Apr 2015), pp. 34-50)

2. Suksub, K. and Katejanekarn, T. (2014), “Performance Evaluation Procedure for a Small Batch-Type Solid Desiccant Dehumidifier”, The Sixth International Conference on Science, Technology and Innovation for Sustainable Well-Being (STISWB VI), Apsara Angkor Hotel, Siem Reap, Kingdom of Cambodia, August 28-30, 2014, Paper No. ENE21-ID123, pp. 97 (9 p.). (Accepted to be published in RMUTI Journal Special Issue 1 2015, pp. 46-54)

3. Panangnuwong, W. and Katejanekarn, T. (2012), “Influence of Input Parameters on the Performance of a Liquid Desiccant Dehumidification System”, The 26th Conference on Mechanical Engineering Network of Thailand (ME-NETT #26), Dusit Island Resort Hotel, Chiang Rai, Thailand, October 24-27, 2012, ETM2014, pp. 171-172.

4. Katejanekarn, T. and Wichaisin, S. (2012), “Improvement of Dehumidification Effectiveness Prediction Models”, The Fourth International Conference on Science, Technology and Innovation for Sustainable Well-Being (STISWB IV), The Zign Hotel, Pattaya, Thailand, August 10-12, 2012, Paper No. 10, pp. 58-64. (Accepted to be published in Journal of Science and Technology Mahasarakham University, Vol. 32, No. 1 (Jan-Feb 2013), pp. 30-36)

5. Katejanekarn, T. and Panangnuwong, W. (2012), “Influence of Operating Parameters on the Performance of a Liquid Desiccant Ventilation Dehumidification System”, The Fourth International Conference on Science, Technology and Innovation for Sustainable Well-Being (STISWB IV), The Zign Hotel, Pattaya, Thailand, August 10-12, 2012, Paper No. 22, pp. 125-131. (Accepted to be published in Journal of Science and Technology Mahasarakham University, Vol. 32, No. 1 (Jan-Feb 2013), pp. 37-44)

6. Katejanekarn, T. and Hudakorn, T. (2011), “An Intermittent Solar Absorption Cooling System Using a Parabolic Trough”, The Third International Conference on Science, Technology and Innovation for Sustainable Well-Being (STISWB III), University of Da Nang, Da Nang, Vietnam, August 12-15, 2011, EN-04, pp. 25-30. (Accepted to be published in Journal of Science and Technology Mahasarakham University, Vol. 31, No. 5 (Sep-Oct 2012), pp. 496-502).

 

(National Conference) 

 8. Katejanekarn, T. (2011), “Performance of a Liquid Desiccant Dehumidification System Using Calcium Chloride Solution”, The 25th Conference on Mechanical Engineering Network of Thailand (ME-NETT #25), Aonang Villa Resort Hotel, Krabi, Thailand, October 19-21, 2011, ETM09, pp. 231.

1.Suebtrakool, T., Suwannarin, R., Temsuksawut, K., Mahapokai, W., and Katejanekarn, T. (2014), “Performance Study of a Movable Liquid Desiccant Dehumidifier”, The 28th Conference on Mechanical Engineering Network of Thailand (ME-NETT #28), Hotel Pullman Khon Kaen Raja Orchid, Khon Kaen, Thailand, October 15-17, 2014, ETM-268, pp. 1375-1383.

4. Wichaisin, S. and Katejanekarn, T. (2012), “Improvement of Models to Predict Dehumidification Process Effectiveness”, The 26th Conference on Mechanical Engineering Network of Thailand (ME-NETT #26), Dusit Island Resort Hotel, Chiang Rai, Thailand, October 24-27, 2012, ETM2013, pp. 169-170.

Daylighting, Thermal and Visual Comfort

1. Vichuda Mettanant, Jirachard Choungchos and Apakorn Natichaowalit, The Effects of Vertical Blind Controls on Daylighting and Visual Comfort, Paper presented at The Fourth International Conference on Science, Technology and Innovation for Sustainable Well-Being (STISWB VI), Thailand, August 28-30, 2014.

2. Vichuda Mettanant, Pipat Chaiwiwatworakul, Automated vertical blinds for daylighting in tropical region, Energy Procedia, Vol 52 , pp 278-286 , 2014.

3. Vichuda Mettanant, Teerasak Supaporngomon, Nutcharee Thanachotchaiwat, Daylight Performance of an Automated Vertical Blind System, Paper presented at The Fourth International Conference on Science, Technology and Innovation for Sustainable Well-Being (STISWB IV), Thailand, August 10-12, 2012.

4. Phumiphat Kakham, Pattana Rakkwamsuk, Vichuda Mettanant, Pipat Chaiwiwatworakul, Modeling of Heat Transfer through Double-Pane Glazed Window with Internal Multiple Slats, Paper presented at The Third International Conference on Science, Technology and Innovation for Sustainable Well-Being (STISWB III), Vietnam, August 12-15, 2011

5. Katejanekarn, T., Lumyim, P., and Thonglar, W. (2014), “A Survey on Thermal Comfort of People in Industrial Factories”, The 5th TSME International Conference on Mechanical Engineering (TSME-ICoME #5), The Empress Hotel, Chiang Mai, Thailand, December 17-19, 2014, Paper No. ETM015, pp. 123 (10 p.).

6. Katejanekarn, T. (2009), “Thermal Comfort Assessment of People in Silpakorn University, Sanam Chandra Palace Campus”, The 23rd Conference on Mechanical Engineering Network of Thailand (ME-NETT #23), Imperial Mae Ping Hotel, Chiang Mai, Thailand, November 4-7, 2009, ETM-043043, pp. 257-258.

Renewable Energy

1. Phuangpornpitak, N. and Katejanekarn, T. (2015), “Proposed Modeling for Assessing Solar PV Water Purification Systems”, The 12th Eco-Energy and Materials Science and Engineering Symposium (EMSES 2015), Peace Laguna Resort & Spa, Krabi, Thailand, June 11-14, 2015, pp. 10-16.

2. Pinpathom, K., Gajaseni, N., and Katejanekarn, T. (2013), “Influential Factors in Choosing Alternative Fuel Vehicles”, National Conference on Engineering and Industrial Technology 2013: Sustainable Technology Development, Faculty of Engineering and Industrial Technology, Silpakorn University (Sanam Chandra Palace Campus), Nakhon Pathom, Thailand, December 2-3, 2013, O-03, pp. 2 (17 p.).

3. Prasartkaew, B. and Katejanekarn, T. (2013), “Actual Performance Evaluation of a Solar-Biomass Hybrid Cooling System”, The 4th TSME International Conference on Mechanical Engineering (TSME-ICoME #4), Dusit Thani Pattaya Hotel, Pattaya, Chonburi, Thailand, October 16-18, 2013, Paper No. ETM-1004, pp. 123 (5 p.).

4. Prasartkaew, B. and Katejanekarn, T. (2013), “Heat Losses Evaluation of a Renewable Energy Based Air Conditioning System”, The Fifth International Conference on Science, Technology and Innovation for Sustainable Well-Being (STISWB V), The Grand Luang Prabang Hotel & Resort, Luang Prabang, Lao PDR, September 4-6, 2013, Paper No. MME07, pp. 27 (5 p.).

5. Hudakorn, T. and Katejanekarn, T. (2011), “Performance of a Square-Corrugated Air Collector with Attached Internal Fins Solar Drier for Red Chili Drying”, The Third International Conference on Science, Technology and Innovation for Sustainable Well-Being (STISWB III), University of Da Nang, Da Nang, Vietnam, August 12-15, 2011, EN-19, pp. 122-127. (Accepted to be published in Journal of Science and Technology Mahasarakham University, Vol. 31, No. 5 (Sep-Oct 2012), pp. 592-597)

6. Vichuda Mettanant, Upgrading of Mulberry Branches by Torrefaction, Paper presented at The Fourth International Conference on Science, Technology and Innovation for Sustainable Well-Being (STISWB V), Thailand, September 4-6, 2013.

Engineering Business

1. Srisomyong, T., Boonkaew, N., and Katejanekarn, T. (2013), “Applying CPM/PERT for Project Acceleration Optimization and Project Cost Reduction”, National Conference on Engineering and Industrial Technology 2013: Sustainable Technology Development, Faculty of Engineering and Industrial Technology, Silpakorn University (Sanam Chandra Palace Campus), Nakhon Pathom, Thailand, December 2-3, 2013, O-04, pp. 3 (20 p.).

2. Kunlayapichet, A., Lagsnawilai, W., and Katejanekarn, T. (2013), “Worthiness of Cut-rose in Evap Greenhouse and Outdoor Cultivation”, Home Agricultural Magazine (Kehakaset), Vol. 37, No. 11 (Nov 2013), pp. 218-221.

Share...

library

facebookmechanicalsilpakorn

youtubeME

Course

bengme

btecheb

mengenergy

phdenergy

Alumni

f alumni

Job Search

JobME Bigsize

Silpakorn University

eng c

su c

ทุนการศึกษา

scholar

STISWB 2016

sakaeo

Download

ตำราเรียน

แบบฟอร์มที่เกี่ยวข้อง

ปริญญานิพนธ์

แผนผังหลักสูตร

สำหรับอาจารย์

Admissions

ข้อมูลการรับสมัครนักศึกษา : โครงการปกติ และ โครงการเพิ่มพิเศษ

Admissions 
กรอกใบสมัคร 

1)โครงการเทคโนโลยีอุตสาหกรรมสัญจร ประเภท ก.  
2)โครงการเทคโนโลยีอุตสาหกรรมสัญจร ประเภท ข. 
3)โครงการส่งเสริมเด็กดีมีคุณธรรมและบำเพ็ญประโยชน์เพื่อสังคม
4)โครงการรับนักศึกษาจากโรงเรียนผู้มีความสามารถ พิเศษทางด้านวิทยาศาสตร์ และคณิตศาสตร์  
5)โควตาพิเศษ มหาวิทยาลัยศิลปากร (28 จังหวัด)
6)โครงการรับนักศึกษาเพิ่มพิเศษฯ สาขาวิชาวิศวกรรมเครื่องกล
7)โครงการรับนักศึกษาเพิ่มพิเศษฯ สาขาวิชาธุรกิจวิศวกรรม


Login

We have 64 guests and no members online

promise